Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[speedjunky01]

Ya!



Get the integra 4 door rear seats.....   

easier said then done my friend lol like no honduhs up here in NH if you spot some teg rears LMK 

[speedjunky01]

well said fuck it to making the interior nice and shot an email over to delta 

im sure they will do good things

[speedjunky01]

back from the dead did some work on the interior

picked up a can of this shit from autozone, turned out pretty good to me


the end result

just mask it really carefully, do a good 2-3 coats took me 2 cans all 4 doors

having my mom do the rear seats in leather for full out baller interior

[2slow]

yeah that vinyl and fabric paint works really good actually. i redid my tan dash in semi gloss black it looks brand new

[speedjunky01]

yeah that vinyl and fabric paint works really good actually. i redid my tan dash in semi gloss black it looks brand new

yeah i was suprised how well it sticks and it doesnt rub off on clothes wither so far.

i need to get this POS on the road miss driving it too much, still need to fit the coupe bumper, trim it while trying to keep the stock grill, then pain it to match best i can

anyone know where i can find matching pain code r72p in a rattle can? lol

[speedjunky01]

BALLIN




straight up gangsta



time to go do some burnouts to celebrate

[speedjunky01]

mom is doing WORK on the rear seats

using some cheap "leather" whatever i dont care its an 18 year old civic lol i think thy look great for 7 dollars in materials they are just covers slip right over so i fi sell it can take them with me

[glustic]

mom is doing WORK on the rear

[speedjunky01]

mom is doing WORK on the rear

kindly go fist yourself sir

[glustic]

mom is doing WORK on the rear

kindly go fist my mother sir

Sorry I don't mess around with monkeys sir

[speedjunky01]

MOAR updates

 ;D

crammed on another intercooler condum this time off a coupe(yes i know swap the fenders/hood.corners so it fits right) well im a cheap fuck so i just crammed it on even managed to keep the grill somewhat lol.



the bumper sat in the sun and was all twisted up, hope its suny tomorrow and it rights its self, i tried to heat it with a torch but no go

then i got bored and added some speed holes!



cant even see them unless you know to look for them, they are down super low below the rear bumper so yeah it does remove some of the parachute effect, used an old cutoff wheel as a template for the holes, calibrated eye ball did the rest  :yes:



H I DEEZ son with some more CDM headlights SOOOO MUCH clearer then the 18 year old stockers!!! i plan on resporing thestockers and painting the inside black eventually.

moar to come tomorrow

[ApexSilver06MR]

yeah that vinyl and fabric paint works really good actually. i redid my tan dash in semi gloss black it looks brand new

yeah i was suprised how well it sticks and it doesnt rub off on clothes wither so far.

i need to get this POS on the road miss driving it too much, still need to fit the coupe bumper, trim it while trying to keep the stock grill, then pain it to match best i can

anyone know where i can find matching pain code r72p in a rattle can? lol

http://stores.sanleandrocolor.com/StoreFront.bok


call them.  we used to get all of our honda paint in rattle cans from here.  the shop is like 5 mins away from my moms house.  if he wont ship, let me know.  i can pick iot up for you this weekend. 

[glustic]

Get a new front bumper that looks like asshole

[speedjunky01]

Get a new front bumper that looks like asshole

fist your self this isnt a pretty contest, and i think it looks good as fuck, once it kinda settles onto the car ill trim up the holes a bit to make them even

thanks a bunch apex but bordoux or something like that from autozone looks close enough to me, the front bumper used to be teal

[Lowerit]

Function over form

the bumper is tits, it says "I came to party"

[turbob16hatch]

The front bumper wouldn't look so bad if the holes were even. I reminds me of the skylines where they cut up the bumpers and frames to lighten them as much they can. Kinda looks cool.

[speedjunky01]

lowerit lmao

and turbo, i plan on evening them out once the bummper kinda gets used to being on a car not under a pile of snow and it bends back in shape now for some updates while i wait for some plaint to dry lol

repin harber freight son!! im doing the DP in two sections so if/when i bottom out its easier to fix an will be easier to take on/off


anti-lag will take any bits of slag/flux right off hahah


i got to work on the waistgate dump tube and though what would rHMT do??


yes or no? someone please talk me out of doing this because im about to lol

[thehatchninja]

I would do it on a spare hood

[Eggylshatch]

don't do it if its your dd.  And if you do the wg out of the hood, you better do the fucking downpipe too

[LS1pwNzJ00]

Get a new front bumper that looks like asshole

+1

And the holes in the rear look super gay, you shouldn't have cut any at all because theres still the socalled
"parachute effect" since you didnt cut them in the farthest rearmost part of the bumper.  Just take the goddamn bumper off if you are so worried about the 'parachute effect"

[speedjunky01]

Yeah to each his own on the front but I like it so it's gonna stay

The wg I'm gonna quit being a lazy ass and run it under

As for the rear you really can't even tell it's cut unless your layin on the ground and know to look for the holes. I think it will help the "parachute" effect since the foam is right above the holes and almost seals against the rear bumper so cutting them higher wouldnt really do any good

Thanks for the advice though just gotta finish weld the 2nd piece of the dp, change the ds axle and she is back on the road!!!

[glustic]

Get a new front bumper that looks like asshole

+1

And the holes in the rear look super gay, you shouldn't have cut any at all because theres still the socalled
"parachute effect" since you didnt cut them in the farthest rearmost part of the bumper.  Just take the goddamn bumper off if you are so worried about the 'parachute effect"

You gotta remember its JAY DEE EMMMM

[speedjunky01]

Get a new front bumper that looks like asshole

+1

And the holes in the rear look super gay, you shouldn't have cut any at all because theres still the socalled
"parachute effect" since you didnt cut them in the farthest rearmost part of the bumper.  Just take the goddamn bumper off if you are so worried about the 'parachute effect"

You gotta remember its JAY DEE EMMMM

This

[ratcityrex]

Fuck it, its not like its a show car, its a street car. People are just gona think that is just onther ricer....lol

I love the font bumper. Fuck everyone else that say otherwise!   Jew

[malichite]

Shit looks better then my car

[speedjunky01]

Shit looks better then my car

thanks though no matter what i do the DP flange wont stop leaking, metal gasket, copper sprayed, bolts tight as FUCK ill loosen and retry ASAP
 -the JB weld is seeping oil through it on the return and no its not the AN fitting,
-the tranny pisses oil out of the rear seal where the shifter goes in and i cant get it to stop for the fucking LIFE of me yeas i switched the seal
-the 2nd section of the DP is ghetto as fuck but other then that its fucking tits lol

if i can adress those issues i would be a very content man

[Eggylshatch]

for the jb weld you need to make sure both surfaces are clean and oil free, maybe even slightly scuffed to give it some purchase, and you need to make sure you give it time to set before theres oil trying to violate it.  Is your dp flange warped to fuck?  Belt sander is your friend.  Tranny- your guess is as good as mine, but if a tranny was blowing lube out its rear, I would use less lube on her/him.

[speedjunky01]

I got the flange from wier so you know it's thick as fuck, and I doubt my ho
e depot welder can cause too much warp either way I welded nice ands slow.

But yeah think I'm gonna eventualy take it off and smooth it but till then fuck it just soot under the hood.

As for the jb I may have been too quick to fill her up with oil first time around think I'll sand it down next oil change and throw on a fresh coat until then it's rust protection for the underside of the car

I see what you did there with the last comment

[speedjunky01]

iphone pics for the fail!!

once i get it clean,tinted, and waxed ill get someone with a good cam to snap some photos





i forgot how good 13psi feels, I came when i hit antilag and was spinning in 2nd

[speedjunky01]

 



now to call the folks over at delta cam for a regrind . . . im thinking 272 or bigger