Topic: ~~~~~~~~~~~Blown turbo seals 9/15/10 Ratcityrex's B18a1 Build 296hp/289tq NO56k (Read 200578 times)

90turboteg · « **Reply #510 on:** March 05, 2010, 08:05:12 PM »

sweet, tape the fittings on the can and paint it. i think it would look much better satin black, thats what color myn is. cant wait to see numbers nig nog, and you can come up somtime and take me for some rippers, then go get a burger and beer

ratcityrex · « **Reply #511 on:** March 05, 2010, 09:47:11 PM »

Well Got it done today

Fits great, looks good and better yet, it works

So It took about 20 min for my car to reach operating temp with the fan hardwired on like have had it, b4 it would only take about 7min. This fan is totaly kick ass, Its like a damn wind tunnel when its on....lol

On to the pics
Look what showed up in the mail today from another local nw NIG

Figured while the rad was out it would be alot easyer to replace my dp gasket with my new copper gasket.

this it what it looked like after I pulled the bolts

And My new K&N filter installed

Here it is installed

All in all I will say it turned out greeat.

90turboteg · « **Reply #512 on:** March 05, 2010, 11:23:57 PM »

fuck ya man, your shits badass. now get the can on and call the black man for nog boost racegas dirty 3rds fun.

thats a big filter

glustic · « **Reply #513 on:** March 08, 2010, 12:51:25 AM »

What adapter is the brass on your feed line? The standard 12x1.5? My feed line is leaking from that gold adapter

ratcityrex · « **Reply #514 on:** March 08, 2010, 01:31:53 AM »

I think its 1/4"npt to 1/8"npt. I think that your holset is sae, and not metric. But im not 100% sure on that.

ApexSilver06MR · « **Reply #515 on:** March 08, 2010, 01:41:54 AM »

Quote from: ratcityrex on March 08, 2010, 01:31:53 AM

I think its 1/4"npt to 1/8"npt. I think that your holset is sae, and not metric. But im not 100% sure on that.

its metric

shroud looks good aj

ratcityrex · « **Reply #516 on:** March 08, 2010, 06:35:27 PM »

Well it looks like the getting hot issue is over. I couldnt get my temp above 186 today. It was pretty cold out. It was about 40 outaide today. I did about 5 or 6 2nd and 3rd gear rippers in a row and couldent get it to go above 186. And when i was just cruzing it was at 180ish.

900s · « **Reply #517 on:** March 08, 2010, 07:35:54 PM »

Quote from: ratcityrex on March 08, 2010, 06:35:27 PM

Well it looks like the getting hot issue is over. I couldnt get my temp above 186 today. It was pretty cold out. It was about 40 outaide today. I did about 5 or 6 2nd and 3rd gear rippers in a row and couldent get it to go above 186. And when i was just cruzing it was at 180ish.

That aint cold, it was almost that warm this weekend and it felt like fucking summer!

Kickass shroud, glad to see its workin for you. I think I'm gonna have to steal your radiator idea for the ED eventually...

Teg2boo · « **Reply #518 on:** March 08, 2010, 09:51:53 PM »

Quote from: ratcityrex on March 08, 2010, 06:35:27 PM

Well it looks like the getting hot issue is over. I couldnt get my temp above 186 today. It was pretty cold out. It was about 40 outaide today. I did about 5 or 6 2nd and 3rd gear rippers in a row and couldent get it to go above 186. And when i was just cruzing it was at 180ish.

Mine only "overheat" (little over middle of stock gauge) when I'm in the traffic for a long time in a sunny summer day over 25C. I just press the fan button and it cold down to normal. It's an ebay slim fan.

My car is black, it doesnt help in a sunny day. (no racist allusion)

Good job sir. Full length radiator FTW!

ratcityrex · « **Reply #519 on:** March 10, 2010, 08:02:38 PM »

Well only have a couple of things to wrap up with this thing and it will be on to the nog setting. So here is one thing I can check off the list. Got the baffles for the valve cove done today, now im just wating for me 90* an fitting to show up from speedwaymotors.com for the oil pan.

Here is the setup b4

And here is what happens when you dont give a fuck about how it looks,

Gona work out great!! ;D Just needs a good cleaning!!

glustic · « **Reply #520 on:** March 10, 2010, 08:07:49 PM »

Throw that trick slut on and get to the dyno!

ratcityrex · « **Reply #521 on:** March 10, 2010, 08:11:22 PM »

Fuck man not ready for the dyno yet. As you can see in the background of the last pic I have 4 things left to get done b4 It see's the dyno. It will see the dyno on the dyno day for sure. Hopefully b4 that too. But we will see. I might just do a street tune with dave and then tune the high boost runs on the dyno. Its not easy to tun by myself while driving and trying to not get tire spin.....lol WHHHEEEEEE!!!

malichite · « **Reply #522 on:** March 10, 2010, 08:57:22 PM »

Fuck yeah nog, almost there.

JACER63 · « **Reply #523 on:** March 10, 2010, 09:14:28 PM »

is that an overhead fan filter for a oven?..baffles look great!

ratcityrex · « **Reply #524 on:** March 10, 2010, 11:07:59 PM »

Quote from: JACER63 on March 10, 2010, 09:14:28 PM

is that an overhead fan filter for a oven?..baffles look great!

Is what an overhead fan filter for an oven? I have not used such parts on this build, but its not a bad idea

AbaZ · « **Reply #525 on:** March 10, 2010, 11:08:22 PM »

air filter? don't think I've ever had one of those connected to a turbo

ratcityrex · « **Reply #526 on:** March 11, 2010, 02:46:43 AM »

Quote from: AbaZ on March 10, 2010, 11:08:22 PM

air filter? don't think I've ever had one of those connected to a turbo

Well I was just gona say fuck it and not run one, But with my luck I would suck up some gravel going down the road and it would fucking piss me off! :hotrex:

90turboteg · « **Reply #527 on:** March 20, 2010, 04:07:53 AM »

get anything done yet nog? im building my motor this weekend, might take pics and post my build thread next week somtime

ratcityrex · « **Reply #528 on:** March 22, 2010, 11:51:24 PM »

Quote from: 90turboteg on March 20, 2010, 04:07:53 AM

get anything done yet nog?

Been super swamped with life. Dog had surgiry, and set me back 1k

But what are you gona do, hes like my kid. But better, he dosent talk back, and hes hella fucking cool!

But I did manage to convert my ecu to a vtec ecu so I could try out the crome free with the whole antilag/2 map thing and it seems to work out pretty well.

So things to do.
1. Drill my extra oilpan for catch can return
2. Drill my catchcan and wash it out and mount it. \
3. Wash my valve cover out, and my newly drilled oilpan
4. Put my 3bar in and street tune my car
5 Talk to the nog and get a little tuning

speedjunky01 · « **Reply #529 on:** March 23, 2010, 08:46:46 AM »

Glad to hear the antilag is working for you

DRQPQUT · « **Reply #530 on:** March 26, 2010, 01:22:22 PM »

your build came together.....like butt cheeks

i like

ratcityrex · « **Reply #531 on:** March 26, 2010, 03:24:24 PM »

2days plan is to drill and clean my extra oilpan, and then maybe if i have time i will then paint my catch can. I ordered up some 1/0 gauge welding wire last night to replace the 8gauge i have running from the alt back to the cutoff swich now :X Im also gona wire in a relay and rewire my fuel pump, and then put in a bulkhead at the firewall so i dont have to pop my trunk to jump my car. And last of all i need to wire a bigger gauge wire to my fan becuase after i run the fan for about 20min or so and turn the car off and then back on it pops the stock 15amp fuse. That bitch pulls some power!!

malichite · « **Reply #532 on:** April 09, 2010, 06:23:01 PM »

Any updates!!!! ;D

jdmhatchracer94 · « **Reply #533 on:** April 11, 2010, 12:16:58 PM »

really anything new

ratcityrex · « **Reply #534 on:** April 11, 2010, 01:45:06 PM »

You bitches are blowing me up!!

Ok so, yesterday I pulled the oil pan, put the new hi flow/hi pressure obd2 oil pump on. Figured while I was there I would throw my other oil pan and valve cover on so I could mount the catch can. Got about half way done and called it a night. So now im gona fill my new oil pan up with water to make sure it dose not leak around my return flanges on the pan. (1 for turbo, and 1 for catch can) Because that where my last pan was leaking and no mater what I did I couldn't get it to stop. I will post pics when I'm all done. Hopefully today, or tomorrow morning.

Urban Indian · « **Reply #535 on:** April 11, 2010, 02:24:42 PM »

mmmmmmm

I am excited

malichite · « **Reply #536 on:** April 11, 2010, 02:34:14 PM »

Sweet. Can't wait to see pics of the new catch can setup. Speaking of, I need to go finish mine today too.

92CXyD · « **Reply #537 on:** April 12, 2010, 11:54:09 AM »

Quote from: malichite on April 11, 2010, 02:34:14 PM

Sweet. Can't wait to see pics of the new catch can setup. Speaking of, I need to go finish mine today too.

Speaking of I need to get started on mine.

;D

ratcityrex · « **Reply #538 on:** April 12, 2010, 03:58:46 PM »

Well I didn't get any new pics of the can setup, but it did turn out pretty good. The only thing is I need to go get a different filter for it. One thats sealed with a barb coming off of it so I can run a hose off of it to under my car so I don't drive down the road smelling of oil vapor

. I also need to get some different hose. The garden hose just isn't going to cut it. It gets way to hot sitting right above my turbo mani and get super squishy. I will get pics of this thing tomorrow. Cam battery is dead.

ratcityrex · « **Reply #539 on:** April 14, 2010, 12:37:59 PM »

I will get some pics of the setup today

But I will be also switch some sit around. Oh and btw, it looks like I might have a street tune setup with NIGNOG Leed for the 1st of may

News:

Author Topic: ~~~~~~~~~~~Blown turbo seals 9/15/10 Ratcityrex's B18a1 Build 296hp/289tq NO56k (Read 200578 times)