Topic: Project ten second D15 (Read 33346 times)

92CXyD · « **Reply #30 on:** May 27, 2009, 12:03:28 AM »

Quote from: Joseph Davis on May 26, 2009, 11:08:25 PM

You need to buy a nitrous kit. Haven't you heard? 9's are the new 10's.

Nice ;D

dvst8r · « **Reply #31 on:** May 27, 2009, 12:10:36 AM »

Quote from: Joseph Davis on May 26, 2009, 11:08:25 PM

You need to buy a nitrous kit. Haven't you heard? 9's are the new 10's.

I think that turbo has enough in it for 9's, but I doubt that transmission does.

90dx · « **Reply #32 on:** May 27, 2009, 01:41:01 AM »

Verified the Ostrich is bunk tonight so pack it up to ship out tommorow

I'm not sure what to run the car on for the mean time or just wait to get the Ostrich back, I could use Crome and my Willems burner but that shit is getto. I will get the wiring finished up after my 4 day tour on the weekend.Went to help Urban Indian out this evening but it was total cluster fuck/failure scene there

Passenger · « **Reply #33 on:** May 27, 2009, 02:16:41 AM »

Quote from: dvst8r on May 25, 2009, 11:08:49 PM

Looks good, when you come out to castrol, we can fix the fluxcored madness, and put a vibrant on it. Even if I have to drag the tig all the way to Edmonton.

You know you are a lazy bastard when...
When you call picking up your 45lb dynasty200dx "dragging it around".

Passenger · « **Reply #34 on:** May 27, 2009, 02:18:44 AM »

Quote from: 90dx on May 27, 2009, 01:41:01 AM

Verified the Ostrich is bunk tonight so pack it up to ship out tommorow I'm not sure what to run the car on for the mean time or just wait to get the Ostrich back, I could use Crome and my Willems burner but that shit is getto. I will get the wiring finished up after my 4 day tour on the weekend.Went to help Urban Indian out this evening but it was total cluster fuck/failure scene there

So honestly, is it going to be ready for the weekend? Or is there just all sorts of Indian Fail going on?

caged · « **Reply #35 on:** May 27, 2009, 02:30:57 AM »

The build is looking good

trevor72 · « **Reply #36 on:** May 27, 2009, 01:42:39 PM »

Can't wait to see some colour in that hot mini ram mani or w/e its called. Looks awesome dude, glad you got back on this.

Joseph Davis · « **Reply #37 on:** May 27, 2009, 06:28:31 PM »

INDIAN FAIL LOL

ok

90dx · « **Reply #38 on:** May 28, 2009, 04:46:22 AM »

Okay RMA from Moates done he is good to deal with as always unfortunetly though the shipping is gonna cost me $100 to get it there and back in a faster then the USPS tuna boat method

As far as running a 9 i am pretty leary about this SSR 4.7 final drive i have in the tranny along with the general D series shitty trannyness that is always looming

Joseph Davis · « **Reply #39 on:** May 28, 2009, 09:03:41 AM »

So you'll shear a FD trying to launch super hard on anything bigger than a 24.5" slick, or trying to bang gears. Do like the rest of the world and pile on the power to offset mild driving.

dvst8r · « **Reply #40 on:** May 28, 2009, 10:11:54 AM »

Quote from: 90dx on May 28, 2009, 04:46:22 AM

Okay RMA from Moates done he is good to deal with as always unfortunetly though the shipping is gonna cost me $100 to get it there and back in a faster then the USPS tuna boat method As far as running a 9 i am pretty leary about this SSR 4.7 final drive i have in the tranny along with the general D series shitty trannyness that is always looming

You should grab the Indian's Burn1 and at least get it fired on a chip.

I just saw that turbo make 545WHP on a CR Cummins, So it should have no problem making 600+ on a Honda.

onlyflash944 · « **Reply #41 on:** May 31, 2009, 09:52:05 PM »

whats the over under for how long that bay stays pearly white?

nice build tho, still a little skeptical about the cage and the rear shock towers.

dvst8r · « **Reply #42 on:** May 31, 2009, 10:05:51 PM »

Quote from: onlyflash944 on May 31, 2009, 09:52:05 PM

whats the over under for how long that bay stays pearly white?

nice build tho, still a little skeptical about the cage and the rear shock towers.

I am a little skeptical about the bars tying into two 1/8th plates sandwiching the floor, but it pass's NHRA tech... The shock tower is probably the most reinforced place on the car, as it has to carry the weight of the car. I could have put the bars to the floor, but having built a number of off-road cages that have been flopped and rolled, I would trust my life to that setup. Albeit I wish we would have done the front half and not just the roll bar, but that was 90dx's call not mine.

danz · « **Reply #43 on:** June 09, 2009, 02:45:15 AM »

POWER FUCKING FIST.

i didnt know u were local. nice.

tandrew23 · « **Reply #44 on:** June 09, 2009, 07:47:54 AM »

this may be hmt but orange rtv will not hold up on that there wastegate buddy

Lowerit · « **Reply #45 on:** June 09, 2009, 08:49:13 AM »

Power Fist...

WTF?

You rocking the P.A Ching Chong goodness?

dvst8r · « **Reply #46 on:** June 09, 2009, 10:11:43 AM »

Quote from: danz on June 09, 2009, 02:45:15 AM

POWER FUCKING FIST.

i didnt know u were local. nice.

90dx is the pg crew, OG.

90dx · « **Reply #47 on:** June 09, 2009, 10:24:54 AM »

Quote from: tandrew23 on June 09, 2009, 07:47:54 AM

this may be hmt but orange rtv will not hold up on that there wastegate buddy

Its copper high temp exh sealant

Still nothing back from Moates

I have to head to school for a couple weeks on Sunday so i dont think there will be any updates for a while.And Danz yes I go by 89hatch on VCC and this would be home made setup number 5 been doing this for quite a while now

hotrex · « **Reply #48 on:** June 11, 2009, 05:35:03 AM »

Quote from: tandrew23 on June 09, 2009, 07:47:54 AM

this may be hmt but orange rtv will not hold up on that there wastegate buddy

stfu nigger

Loki · « **Reply #49 on:** June 11, 2009, 10:23:15 PM »

Looks good Matt.

Travis · « **Reply #50 on:** June 11, 2009, 11:26:11 PM »

Quote from: Loki on June 11, 2009, 10:23:15 PM

Levi and I will give you mad road head/jerk session for a ride

yamaha6611 · « **Reply #51 on:** June 12, 2009, 12:44:13 AM »

i havent read 100% of this, but... is this a race only car? if so, ditch that exhaust

looks good though, very clean

dvst8r · « **Reply #52 on:** June 12, 2009, 12:53:30 AM »

Quote from: yamaha6611 on June 12, 2009, 12:44:13 AM

i havent read 100% of this, but... is this a race only car? if so, ditch that exhaust

looks good though, very clean

90dx plans to drive it on the street as well. It will be a street legal race car, as such is kind of trying to keep it "low profile"

Loki · « **Reply #53 on:** June 12, 2009, 01:01:55 AM »

Quote from: Travis on June 11, 2009, 11:26:11 PM

Quote from: Loki on June 11, 2009, 10:23:15 PM
Levi and I will give you mad road head/jerk session for a ride

brine04 · « **Reply #54 on:** November 07, 2009, 06:44:46 PM »

Joseph Davis · « **Reply #55 on:** November 07, 2009, 07:40:55 PM »

dvst8r · « **Reply #56 on:** November 07, 2009, 07:56:37 PM »

Rumor has it, this was sold before completion, and all that is left is fail. $:-\$

boosted 00 black si · « **Reply #57 on:** November 07, 2009, 09:40:32 PM »

i like

90dx · « **Reply #58 on:** November 08, 2009, 01:04:52 AM »

No it runs and motor is just about broke in. Needs a tune soon but that will be done in spring. I will post some pics soon.

Loki · « **Reply #59 on:** November 09, 2009, 07:18:19 PM »

Quote from: 90dx on November 08, 2009, 01:04:52 AM

No it runs and motor is just about broke in. Needs a tune soon but that will be done in spring. I will post some pics soon.

Good work.

News:

Author Topic: Project ten second D15 (Read 33346 times)

90dx

90dx

90dx

90dx