Topic: Trevor's Canadian D Build saga now post pinks all out *updates 7/28/10* (Read 85489 times)

dvst8r · « **Reply #60 on:** June 09, 2009, 01:52:40 PM »

Quote from: Urban Indian on June 09, 2009, 01:44:34 PM

Shit works now but in need of a d-series balancer.

D16Z6 to be precise.

trevor72 · « **Reply #61 on:** June 13, 2009, 02:02:54 PM »

assistance is very appreciated guys, you know that.... how was you pizza btw

these came in the mail today

somehow the 4bar map didn't make it, but i'm sure it won;t be too far behind.

marcj · « **Reply #62 on:** June 13, 2009, 02:21:05 PM »

that's sexy

brine04 · « **Reply #63 on:** June 13, 2009, 07:48:53 PM »

Did you niggers grab any of the balancers from the farm? There is probably 2 or 3 there in either the barn or the garage where I keep my car.

dvst8r · « **Reply #64 on:** June 13, 2009, 08:37:47 PM »

Quote from: brine04 on June 13, 2009, 07:48:53 PM

Did you niggers grab any of the balancers from the farm? There is probably 2 or 3 there in either the barn or the garage where I keep my car.

They nigger rigged something together.

highroller54 · « **Reply #65 on:** June 15, 2009, 03:17:31 PM »

looks good trevor, what sized interfooler is that?

dvst8r · « **Reply #66 on:** June 15, 2009, 04:22:25 PM »

Well im not Trevor, but I did help install the intercooler. It is a 24X12X3 super cdm intercooler

highroller54 · « **Reply #67 on:** June 15, 2009, 06:34:24 PM »

I thought that would be a 10 incher, good shit. How much of the bumpers grill needed cut?

trevor72 · « **Reply #68 on:** June 15, 2009, 08:14:26 PM »

Quote from: marcj on June 13, 2009, 02:21:05 PM

that's sexy

thanks

Chad i don't recall to be honest with the intercooler.... i do remember carefully measuring with the bumper off a bunch of times before i chose my poison. IIRC its a 24ish wide by 9" high by 3" deep. I liked it cause i could keep some of the rad support brace. The bumper needed minimal trimming, behind the fog light pockets.

trevor72 · « **Reply #69 on:** July 10, 2009, 10:17:16 PM »

found some pics of the ball hone and carwash hot tanking

oven cleaner does wonders

I think this notch was opened up a little more yet... but that's close

trevor72 · « **Reply #70 on:** July 10, 2009, 10:23:16 PM »

also some not so funny vids from last weekend in calgary with dvst8r

more later of the ride there

trevor72 · « **Reply #71 on:** July 10, 2009, 10:48:08 PM »

HAHA, this makes me laugh everytime, for the simple reason i sound like an idiot, well this is basically self vids of partial ripper

dvst8r · « **Reply #72 on:** July 10, 2009, 10:54:58 PM »

LOL!!! "Look a deer!"

Then proceeds to do like 220+, followed by "fuck there are deer everywhere"

Do you have where we actually raced the trans am?

trevor72 · « **Reply #73 on:** July 12, 2009, 10:13:41 PM »

nope and none of the new camero ss either

trevor72 · « **Reply #74 on:** July 27, 2009, 12:09:26 PM »

well got some time and since the DD is now down with a wounded trans, shit may as well put in the new injectors

injector comparison... id 1000(i think they're actually more like 900 at stock psi) and bosch green tops

Tools

Temporary ugliness

trevor72 · « **Reply #75 on:** August 11, 2009, 12:09:20 PM »

- injector wiring to final install state;
- slicks mounted and test fitted;
- axle out for use as alignment tool (see below

)

then went inside and did this

92CXyD · « **Reply #76 on:** August 11, 2009, 12:28:46 PM »

What exactly are you welding in the diff.?

I assume this would make both axles full engaged at all times.

This car only being used drag racing or are you planning to DD this?

Wouldn't you be going through tires when doing a lot of turns?

trevor72 · « **Reply #77 on:** August 11, 2009, 12:38:22 PM »

Quote from: 92CXyD on August 11, 2009, 12:28:46 PM

What exactly are you welding in the diff.?

spider gears together and spider gears to housing.

there are no corners at pinks all out

92CXyD · « **Reply #78 on:** August 11, 2009, 12:40:46 PM »

Sweet!!!!!!!!!!!! ;D

Are there going to be any vids. when you race this?

dvst8r · « **Reply #79 on:** August 11, 2009, 12:47:07 PM »

I think there are still some Foowee limiting straps to come.

92CXyD · « **Reply #80 on:** August 11, 2009, 01:03:51 PM »

I remember reading about those limiting straps using seat belts.

Any chance of seeing the limiting straps being made on this build?

I can not find the the old build thread on these straps.

trevor72 · « **Reply #81 on:** August 11, 2009, 01:08:04 PM »

of course there will be VIDS!!!

and there will be pics of the limiting strap install i'm sure on that, its just a matter of me going and actually pulling the belts and sizing them

92CXyD · « **Reply #82 on:** August 11, 2009, 01:08:41 PM »

Cool ;D

highroller54 · « **Reply #83 on:** August 11, 2009, 01:58:09 PM »

good fucking work my little fair skinned friend

sewell94 · « **Reply #84 on:** August 11, 2009, 02:52:51 PM »

Glad to see those injectors are working out good for you

how much boost you giving her currently??

dvst8r · « **Reply #85 on:** August 11, 2009, 03:04:55 PM »

Quote from: sewell94 on August 11, 2009, 02:52:51 PM

...how much boost you giving her currently??

LOL, he is giving it none, the diff is on the floor being welded.

trevor72 · « **Reply #86 on:** August 11, 2009, 05:13:27 PM »

Quote from: highroller54 on August 11, 2009, 01:58:09 PM

good fucking work my little fair skinned friend

Thanks

So far I'm impressed with the injectors, even on a basemap they are great. Boost has only gone to 10psi so far on conservative setting. Until Thursday where Leed takes over.

trevor72 · « **Reply #87 on:** August 11, 2009, 05:15:19 PM »

Quote from: dvst8r on August 11, 2009, 03:04:55 PM

Quote from: sewell94 on August 11, 2009, 02:52:51 PM
...how much boost you giving her currently??

LOL, he is giving it none, the diff is on the floor being welded.

hit 3psi driving it around he block before loading onto the trailer yesterday

brine04 · « **Reply #88 on:** August 11, 2009, 07:45:34 PM »

shit i forgot to get you that MBC

ratcityrex · « **Reply #89 on:** August 11, 2009, 08:10:35 PM »

Quote from: trevor72 on August 11, 2009, 05:15:19 PM

Quote from: dvst8r on August 11, 2009, 03:04:55 PM
Quote from: sewell94 on August 11, 2009, 02:52:51 PM
...how much boost you giving her currently??

LOL, he is giving it none, the diff is on the floor being welded.

hit 3psi driving it around he block before loading onto the trailer yesterday

Quote from: brine04 on August 11, 2009, 07:45:34 PM

shit i forgot to get you that MBC

A litlle birdy told me that he stole the one I gave levi

News:

Author Topic: Trevor's Canadian D Build saga now post pinks all out *updates 7/28/10* (Read 85489 times)

Author Topic: Trevor's Canadian D Build saga now post pinks all out updates 7/28/10 (Read 85489 times)