Topic: 1991civicsi build thread (Read 93860 times)

1991civicsi · « **Reply #60 on:** September 06, 2009, 10:41:15 PM »

Thanks, I haven't driven it yet but it sounds pretty mean. I'm goin to put the glass back in and get it to Island on wednesday or Friday.

chris · « **Reply #61 on:** September 07, 2009, 01:35:05 AM »

Solid #'s. Should lay down 11's pretty damn easy. Time for a cage!

crxvtec91 · « **Reply #62 on:** September 08, 2009, 05:37:45 PM »

Where are the pic's!

Joseph Davis · « **Reply #63 on:** September 08, 2009, 06:16:11 PM »

Quote from: 1991civicsi on September 06, 2009, 09:22:42 AM

Dynod 360hp at 20psi with the Precision 3431 turbo. 2.5 Bar MAP limited me from upping the boost. Pics to follow.

Dude! Just make the last scalar really rich and go for 25!

Pootie · « **Reply #64 on:** September 09, 2009, 01:27:14 PM »

Goooo Joeee!!

i might be down for Island on Sunday.

97Econobox · « **Reply #65 on:** September 09, 2009, 03:53:04 PM »

Now that is a sexy mess of a shitheap. I love it.

ratcityrex · « **Reply #66 on:** September 09, 2009, 04:03:41 PM »

Loven it!! Nice numbers for 20 psi on another sohc d!! Are you still running the water injection?

AJxr · « **Reply #67 on:** September 09, 2009, 04:31:56 PM »

might come across as a "shitheap" now but i bet that thing will be PRISTINE shortly

1991civicsi · « **Reply #68 on:** September 11, 2009, 08:50:04 AM »

No Alky inj just C16 race fuel this time.

1991civicsi · « **Reply #69 on:** September 19, 2009, 11:55:38 AM »

Went to Island and ran 12.0 @ 120mph. My personal best so far.

CSaddict · « **Reply #70 on:** September 19, 2009, 11:56:48 AM »

Street tires?

1991civicsi · « **Reply #71 on:** September 19, 2009, 12:19:01 PM »

lol no, I was using 10psi on 22in slicks. I need a lot more seat time and practice.

Joseph Davis · « **Reply #72 on:** September 19, 2009, 02:32:18 PM »

That's not bad for 10 psi, sir.

ratcityrex · « **Reply #73 on:** September 19, 2009, 03:13:20 PM »

Nice trap speed!!!!!! Much faster times will follow with more seat time for sure. Should push right into the 11's with ease.

1991civicsi · « **Reply #74 on:** September 19, 2009, 05:03:44 PM »

It took some getting used to shifting at 8k RPM. I never drove with slicks before and what a big difference. It pulls you back in the seat! I wasn't trying to launch as much as getting the car down the track. I kept hitting boost cut and blowing vac lines off the manifold. So after I turned the boost down and secured the vac hoses with zip ties I ran the 12.0.
I gotta say driving a FWD car at the drag strip is no easy task. I'm glad Joe E., John, and Steve's friends were there to give a hand and help me out b/c I was getting a little frustrated at first.

AJxr · « **Reply #75 on:** September 19, 2009, 07:15:03 PM »

hell yeah! 120mph!!

crxvtec91 · « **Reply #76 on:** November 13, 2009, 02:05:34 AM »

Any updates?

1991civicsi · « **Reply #77 on:** November 13, 2009, 04:58:16 AM »

So far I picked up a set of RC 750s and had injector rehab clean them.

I also picked up a used Si trans to rebuild and install a MFactory LSD.

I'm going to get back to work on the body now that it's garaged for the winter.

MFactory LSD
I'll keep updating the pics.

crxvtec91 · « **Reply #78 on:** November 13, 2009, 01:09:41 PM »

Quote from: 1991civicsi on November 13, 2009, 04:58:16 AM

So far I picked up a set of RC 750s and had injector rehab clean them.

I also picked up a used Si trans to rebuild and install a MFactory LSD.

I'm going to get back to work on the body now that it's garaged for the winter.

I'll post pics up later..

How big where your old Rc?

1991civicsi · « **Reply #79 on:** November 13, 2009, 01:26:38 PM »

550cc

chris · « **Reply #80 on:** November 13, 2009, 08:40:23 PM »

Solid. Im so excited to be going back out to the track again next year after almost 3 years. Keep us updated on pics etc. This is a very well written/documented build.

boostinallday · « **Reply #81 on:** November 14, 2009, 10:15:00 PM »

the best built post ever the car is comeing out really clean good numbers to

chris · « **Reply #82 on:** November 15, 2009, 11:34:43 PM »

how much did they charge you for the injector cleaning? Have a set of dsm 450's I need to have checked out.

98vtec · « **Reply #83 on:** November 16, 2009, 12:52:36 AM »

nice times! all these sohc motors have been making some nasty power and pulling so pretty nice times at the track.

Congrats on a well done build thread

1991civicsi · « **Reply #84 on:** November 16, 2009, 10:02:04 AM »

Quote from: chris M on November 15, 2009, 11:34:43 PM

how much did they charge you for the injector cleaning? Have a set of dsm 450's I need to have checked out.

$54.00

crxvtec91 · « **Reply #85 on:** December 14, 2009, 11:49:56 PM »

Sticky bump

sloTeg · « **Reply #86 on:** December 21, 2009, 12:55:36 AM »

good to see the results on the injectors, guess i can rule out a dirty injector causing my motor to fail, even though they only had 500 miles on them

FaphyredSyday · « **Reply #87 on:** December 23, 2009, 07:33:01 PM »

nice looks awesome where did you get the tubing from I almost want to attempt to build my own kit but I dont have a welder,did you do all the welds while it was in the car,what headers did you use,also it looks like you modified them a little near the collector,please do share more,sorry for all the ?s

Joseph Davis · « **Reply #88 on:** December 23, 2009, 08:43:58 PM »

Quote from: 1991civicsi on November 13, 2009, 04:58:16 AM

MFactory LSD

Those things are supposed to be great, but I kinda of dislike their forum rep's posturing. He's not bad by any means, but he comes off like the GE rep only good natured and not intentionally dishonest. It's just the flavor of his posts remind me of GE (when not lying through his teeth) and it makes me a little meh.

Sorry for the threadjack.

1991civicsi · « **Reply #89 on:** December 28, 2009, 01:44:01 AM »

Quote from: Joseph Davis on December 23, 2009, 08:43:58 PM

Quote from: 1991civicsi on November 13, 2009, 04:58:16 AM
MFactory LSD

Those things are supposed to be great, but I kinda of dislike their forum rep's posturing. He's not bad by any means, but he comes off like the GE rep only good natured and not intentionally dishonest. It's just the flavor of his posts remind me of GE (when not lying through his teeth) and it makes me a little meh.

Sorry for the threadjack.

After receiving the diff. I wanted to check to make sure the cover bolts were torqued to spec, so I emailed MFactory.
I received a response to contact Whoopee Doo Racing, which is MFactory's authorized installer. After a conversation I learned that the cover is torqued and thread locked. I was told that some upgraded shift forks are in the works as well.

News:

Author Topic: 1991civicsi build thread (Read 93860 times)

chris

chris

chris