Topic: buks welding thread (Read 187529 times)

jay · « **Reply #150 on:** May 31, 2010, 11:38:43 PM »

Quote from: SecksyPeePee on May 31, 2010, 08:12:20 PM

Don't go bigger than 2.5" till you are planning more power than stock sleeves can handle

16 gauge is good?

jay · « **Reply #151 on:** May 31, 2010, 11:41:52 PM »

409

http://www.mandrel-bends.com/catalog/mandrel-bends-34/409-stainless-steel-14-gauge-74/2-50-stainless-steel-409-3-75-radius-180-degree-mandrel-bend-675.html

14 gauge

Joseph Davis · « **Reply #152 on:** May 31, 2010, 11:49:28 PM »

Quote from: Joseph Davis on May 31, 2010, 11:16:35 PM

Go 3" around the 300whp mark.

Also,

jay · « **Reply #153 on:** June 01, 2010, 12:47:44 AM »

it used to be my avitar,

whats your point

answer my question or get out old man

CSaddict · « **Reply #154 on:** June 01, 2010, 05:46:36 AM »

409 will rust up fairly fast.

HiProfile · « **Reply #155 on:** June 16, 2010, 09:54:23 PM »

But it won't rust completely apart. It's just the ugliest form of protective oxide on common metals.

409 is okay when it won't get very hot, and you intend to wrap it up.

snm95ls · « **Reply #156 on:** June 16, 2010, 11:53:19 PM »

So when are you going to start slinging manifolds, Buk?

jay · « **Reply #157 on:** June 24, 2010, 10:21:23 PM »

Quote from: snm95ls on June 16, 2010, 11:53:19 PM

So when are you going to start slinging manifolds, Buk?

idk soon

bought a regulator and had my bottle refilled (left it on while i was fucked up on some shit)

bought a size 10 cups just so i can be weir lol

im comfortable with a 7 ill rarely use a 5

should be buying some sheet metal and scrap metal tomorrow havent welded in a month or more...

Joseph Davis · « **Reply #158 on:** June 24, 2010, 10:26:48 PM »

Buk, log back off for at least another two months.

Thanks.

jay · « **Reply #159 on:** June 24, 2010, 10:30:51 PM »

Quote from: Joseph Davis on June 24, 2010, 10:26:48 PM

Buk, log back off for at least another two months.

Thanks.

no sir.

going to the metal shop tomorrow and gonna have me some nice fab when i get the metal

for now i need to place another order of metal

jay · « **Reply #160 on:** June 24, 2010, 10:32:43 PM »

best friend died the other day
kind of a wakeup call

meh

im on some bi polar meds now

cant wait to try welding while on the medication hands feel a lot firmer less shaking etc etc

we shall see

Jorsher · « **Reply #161 on:** June 25, 2010, 01:38:16 AM »

I need a downpipe for a little t3 on my ls-vtech.

Make it happen.

jay · « **Reply #162 on:** June 25, 2010, 02:10:01 AM »

Quote from: Jorsher on June 25, 2010, 01:38:16 AM

I need a downpipe for a little t3 on my ls-vtech.

Make it happen.

complete setup or bust.

you already got a miniram so your out

your such a nigger too cause i have a crx i can mock up everything on

chris · « **Reply #163 on:** June 25, 2010, 04:14:48 AM »

Quote from: Jorsher on June 25, 2010, 01:38:16 AM

I need a downpipe for a little t3 on my ls-vtech.

Make it happen.

Ill do it and it will come with 9 pounds of plastic packing material

CSaddict · « **Reply #164 on:** June 25, 2010, 05:47:01 AM »

Quote from: jay on June 25, 2010, 02:10:01 AM

Quote from: Jorsher on June 25, 2010, 01:38:16 AM
I need a downpipe for a little t3 on my ls-vtech.

Make it happen.

complete setup or bust.

you already got a miniram so your out

your such a nigger too cause i have a crx i can mock up everything on

But the important part of that is you can't weld.

Joseph Davis · « **Reply #165 on:** June 25, 2010, 06:57:17 AM »

Quote from: jay on June 24, 2010, 10:32:43 PM

im on some bi polar meds now

They're medicating you for racial characteristics?

ryan89crx · « **Reply #166 on:** June 25, 2010, 10:17:26 AM »

Quote from: CSaddict on June 25, 2010, 05:47:01 AM

Quote from: jay on June 25, 2010, 02:10:01 AM
Quote from: Jorsher on June 25, 2010, 01:38:16 AM
I need a downpipe for a little t3 on my ls-vtech.

Make it happen.

complete setup or bust.

you already got a miniram so your out

your such a nigger too cause i have a crx i can mock up everything on

But the important part of that is you can't weld.

lulz

Jorsher · « **Reply #167 on:** June 25, 2010, 10:21:36 AM »

You won't have much luck finding someone to give you money until you at least have proof that you can weld something together that works.

michigan_soler · « **Reply #168 on:** June 25, 2010, 05:30:52 PM »

Buk, you still in detroit? I need some shitty aluminum tacked togeter... haha

jay · « **Reply #169 on:** June 25, 2010, 08:29:13 PM »

Quote from: michigan_soler on June 25, 2010, 05:30:52 PM

Buk, you still in detroit? I need some shitty aluminum tacked togeter... haha

yeah im in detroitttttt

michigan_soler · « **Reply #170 on:** June 25, 2010, 09:24:52 PM »

Cool. It will be a few weeks probably...

LS1pwNzJ00 · « **Reply #171 on:** June 27, 2010, 01:15:10 AM »

i dont think buk/buks welder can weld aluminum. I may be wrong though. hail Allahu Akbar

jay · « **Reply #172 on:** June 28, 2010, 01:30:30 AM »

Quote from: LS1pwNzJ00 on June 27, 2010, 01:15:10 AM

i dont think buk/buks welder can weld aluminum. I may be wrong though. hail Allahu Akbar

i can and did but it was thin shit and the amps were pretty low bleh

i nigger rigged a welding table today which i will test out tomorrow

jay · « **Reply #173 on:** July 02, 2010, 12:01:18 AM »

CSaddict · « **Reply #174 on:** July 02, 2010, 06:00:08 AM »

Well, the end of the world has arrived. Good job! Now throw out the Fisher price camera and get some decent pics.

Jorsher · « **Reply #175 on:** July 02, 2010, 11:53:35 AM »

Now make a fucking downpipe for me, sand negro

jay · « **Reply #176 on:** July 02, 2010, 08:58:24 PM »

Quote from: CSaddict on July 02, 2010, 06:00:08 AM

Well, the end of the world has arrived. Good job! Now throw out the Fisher price camera and get some decent pics.

lol its my tmobile g1...

welding sheet metal was 100000x easier than welding scd10 ss

lmao im thinking bout fabbing some battery boxes or some shit welding sheet metal actually gives me an adrenaline rush seeing the finished product is fun as fuck idk maybe catch cans?

maybe buy some cheap replacement rear quarters and try my hand at weldin them in?

bleh

Hotrodlincoln · « **Reply #177 on:** July 02, 2010, 09:05:22 PM »

If you're gonna do exterior sheet metal, learn to metal finish, otherwise you'll have a quaterpanel that's a warped pile of shit. Hammer and dolly the weld-shrink. Practice on some junk first....

BoostedSchemes · « **Reply #178 on:** July 02, 2010, 10:13:02 PM »

i think you should start with roll cages, for you and your family

turbob16hatch · « **Reply #179 on:** July 03, 2010, 12:29:54 AM »

buk, quit trying to make things, those welds look like dick.

sit down and weld sample coupons for hours, bead after bead until you can get a weld that doesn't look like you had your eye's closed while doing it.

Serious, your doing the same thing everyone that is self taught did, you trying to jump into things to far when you barely have a grasp on the concept of welding.

News:

Author Topic: buks welding thread (Read 187529 times)

chris